Sunday, January 4, 2009

Using Studs on your Horse: Part II

Like everything else horse related, using studs on a horse involves a plethora of gear if your going to do it correctly and safely. Listed are the basic items you need.


A Selection of Studs

A selection of studs are needed for different conditions that may be ridden on. Different shapes and sizes are avaliable and need to be used correctly to avoid injury. More on this later.








A Tool Box

Containing:

1. A couple of different size wrenches. Used to loosen and tighten studs when putting them in and taking them out.

2. A "Tap". This is used to clean and re-thread the holes in the shoe so the stud screws in correctly. A tap doesn't need to be used if you keep "keepers" in the stud holes when they aren't being used.

3. A stud hole cleaner. As the name says it is used to clean the stud hole. Again, it doesn't need to be used if a "keeper" is kept in the stud holes.



Protective Boots

This is a must as mentioned in Using Studs on Your Horse: Part I horses can easily stand on themselves and cause great damage to their legs. JJ mentioned this story in my comments which shows exactly what can happen if a horse has been studded with no boots, and trailered with them in:

"I don't use studs, but I know a girl who left her trainer's horse's studs on while they trailered him to a show. The show was only twenty minutes away, so I guess they assumed that he would be all right. When they got to the show his legs were pretty much torn up. The vet said put him down. He ended up recovering a few (long and painful) months later, but never enough to go back to work. I agree that boots (for the horse) are ABSOLUTELY necessary. If it kicked itself just a bit, it could tear its leg up"



A Stud Girth

The stud girth is used instead of a normal girth and is used to protect the horses chest from being pierced by the studs when jumping.

Usually made out of a tough leather, the stud girth is a must for any horse wearing studs. Another option is to buy a stud guard that slides onto a normal girth, this is often the cheaper
option but works just as well.



Lubricant
There are lots of different brands that can be used for this . This keeps the studs in good condition and will keep them usable for longer. Cleaning studs after using them is a good idea.





Have you got something else that is great when it comes to studs? Tell us.

Part III: What studs to use where?

2 comments:

Beckz said...

Not all horses need stud girths though. Only those that are really tight in front and would potentially damage their stomachs need them.

Katie said...

Oh ok. Thanks. I thought it was for all horses but thats all good :)